BuzzMachines, Brass/Bronze Sand Casted Tattoo Machine Frames, Hand Made Tattoo Machines, Hand Made Parts & Accessories by Buzz for the Professional Tattoo Artist.

Buzz Machines Hand Made Tattoo Machines & Frames

tattoo machine accessories

Get All Your Tattoo Machine Needs From BuzzMachines

Cast Brass Tattoo Machine Frames & Low Carbon Iron Tattoo Machine Frames from BuzzMachines

standard tattoo machines by Buzz of BuzzMachines

Newly Built Tattoo Machines by Buzz for Sale Now - also Have Your Own Custom Made BuzzMachine

tattoo machine kits by Buzz of BuzzMachines

Handmade Tattoo Machine Accessories and Parts by Buzz

COILS T-TOP COIL CORES COIL WASHERS CAPACITORS HIGH TEMP BELDIN WIRE REPLACEMENT VICE ARMATURE BARS

FRONT BINDING POSTS REAR BINDING POSTS CONTACT SCREWS THUMB SCREWS SPRINGS YOKES

tattoo coils for tattoo machine

various tattoo mahine coils, hand wrapped by BuzzMachines

Washer Choices:
Red Top, Black Top, Phelonic Top

Covering Options:
Black Cloth Tape, Red Shellacked Material, White Cotton Covered Wire

Made With Pure Iron T-Top Cores.

All Coils Made w/ 24awg. High-Temp Beldin Wire, Cotton Wrap is 25awg. High-Temp Wire Wrapped with Cotton.

Mix Various Washers w/ Various Coverings/Cotton-Wraped Wire

Available in the following heights:
1", 1 1/8", 1 1/4"

Available in the following wraps: 8 or 10

When Ordering Please specify:
height, wrap #, washer type, covering type & pre-wired or unwired

Pre-Wired: $22.00 pair

Un-Wired: $15.00 pair
(as in pic)

tattoo coil cores

pure iron t-top coil cores 5/16", available in 1", 1 1/8", 1 1/4" heights

Made of Pure Iron

Available in the following heights: 1", 1 1/8", 1 1/4"

Cores are a bit over 5/16" thick for hamnmer-fit washer end.

Tapped M4 Metric, Easily Re-Tapped at 8/32"

When Ordering Please Specify: Height

$3.00 each

pure iron t top coil cores for making your own tattoo machine coils

Made of Pure Iron

Available in the following heights: 1", 1 1/8", 1 1/4"

Cores are a bit over 5/16" thick for hamnmer-fit washer end

Tapped M4 Metric, Easily Re-Tapped at 8/32"

When Ordering Please Specify: Height

$125.00 for pack of 50
($2.50 ea.)

pure iron t-top cores by BuzzMachines

Made of Pure Iron

Available in the following heights: 1", 1 1/8", 1 1/4"

Cores are a bit over 5/16" thick for hamnmer-fit washer end

Tapped M4 Metric, Easily Re-Tapped at 8/32"

When Ordering Please Specify: Height

$200.00 for pack of 100
($2.00 ea.)

tattoo coil washers

	(Fibre Board or Plastic) When Ordering Please Specify: Color of Washer & Quanitiy of Each.	$1.00 each 20 = $17.00 50 = $37.50 100 = $62.50
	(fiber board) When Ordering Please Specify: Color of Washer & Quanitiy of Each.	$1.00 each 20 = $17.00 50 = $37.50 100 = $62.50
	(fiber board) When Ordering Please Specify: Color of Washer & Quanitiy of Each.	$1.00 each 20 = $17.00 50 = $37.50 100 = $62.50

capacitors for tattoo machines

25 v. 47 mf

$1.00ea.

Hand Cut & Drilled Low Carbon Steel Replacement Vice. Made By Buzz in Canada

armature bar a-bars a bars from BuzzMachines

	3/8" width x 3/16" height made of 10/18 Cold Rolled Low Carbon Steel	$5.00 each 5 = $23.75 ($4.75ea.) 10 = $45.00 ($4.50ea) larger amounts - email us
	3/8" width x 3/16" height made of Iron 2 Lengths Available: 1.75" or 1.90" (total length) Please Specify Length Wanted	$6.50 each 5 = $31.25 ($6.25ea.) 10 = $60.00 ($6.00ea) larger amounts - email us

tattoo front binding posts

All Binders (Front & Rear) Come With All Needed Hardware

All Bindings Threaded 8/32" Unless Specified Differently By You When Ordering

	Comes with Contact Screw.	$8.00 each.
	Comes with Contact Screw. All styles, except 'B', are handmade by Buzz is house Each Style D will be different as they are each individually made on a lathe & shaped by hand.	Styles A-C = $10.00 ea. Style D = $25.00
	Each Hand-Turned Copper Front Binding will be different as they are each individually made on a lathe & shaped by hand. Comes with a Copper Contact Screw, contact screw may vary from the style shown in picture.	$25.00 each.

tattoo rear bindings

All Binders (Front & Rear) Come With All Needed Hardware

All Bindings Threaded 8/32" Unless Specified Differently By You When Ordering

	Please specify which style (A, B, C, D) when ordering	$5.00 ea.
	Style 'D' should have a brass top, looks the same just in brass. Sorry about pic... All styles, except 'E', are handmade by Buzz is house Please specify which style (A, B, C, ect.) when ordering	Style A-E & G = $6 ea Style F = $15.00ea due to each being hand turned on a lathe. For this reason each will vary slightly.
	Please specify which style (A or B) when ordering	$7.00 ea.

tattoo contact screw

	please specify quantity & style (A, B,C, E, F) wanted when ordering	$6.00 ea.
	lost wax cast silver skulls welded onto brass screw please specify quantity wanted when ordering	$25.00
	please specify quantity wanted when ordering	$4.00 ea.
	please specify quantity & style (A or B) wanted when ordering	$10.00 ea.

tattoo thumb screws

		$5.50 ea.
	please specify quantity & style (A, B, C or D) wanted when ordering the pictures are meant to show approximate size of coin that will be used for your thumb screw.	$6.50 ea.

available as either 1 Piece (screw welded on),
or as 2 Pieces.

M4 or 8/32" Threading available.

please pecify Threading (M4 or 8/32")
& Style (1 Piece/Welded or 2 Pieces) wanted
when ordering

$7.00 ea.

tattoo springs

Gauge Sizes Available: 17, 18 or 20 Un-Cut Spring Stock comes in 6" lengths Please specify which gauge you want & how many pieces when ordering	each 6" = $2.00 ea.
Gauge Sizes Available: 17, 18 or 20 Please specify which gauge you want, Front or Rear, how many pieces when ordering	each $2.50 ea.
Gauge Sizes Available: Long Stroke Colour: 17g. Medium Black & Grey: 17g. Short Fast Liner: 18g. Wide Back Spring: 17g. Please specify which 'Style' of spring you want when ordering	each $2.50 ea.

tattoo yokes

1/8" X 3/8" 1/8" = 3.1750 mm Made of 10/18 Cold Rolled Steel Holes are drilled 22mm apart. If other mm between holes needed, please specify when ordering.	$4.00 ea.
3/16" X 3/8" 3/16" = 4.7625 mm Made of 10/18 Cold Rolled Steel Holes are drilled 22mm apart. If other mm between holes needed, please specify when ordering.	$4.00 ea.
1/4" X 3/8" 1/4" = 6.3500 mm Made of 10/18 Cold Rolled Steel Holes are drilled 22mm apart. If other mm between holes needed, please specify when ordering.	$4.00 ea.
5/16" X 3/8" 5/16" = 7.9375 mm Made of 10/18 Cold Rolled Steel Holes are drilled 22mm apart. If other mm between holes needed, please specify when ordering.	$4.00 ea.

	Made of Pure Iron Available in the following heights: 1", 1 1/8", 1 1/4" Cores are a bit over 5/16" thick for hamnmer-fit washer end. Tapped M4 Metric, Easily Re-Tapped at 8/32" When Ordering Please Specify: Height	$3.00 each
	Made of Pure Iron Available in the following heights: 1", 1 1/8", 1 1/4" Cores are a bit over 5/16" thick for hamnmer-fit washer end Tapped M4 Metric, Easily Re-Tapped at 8/32" When Ordering Please Specify: Height	$125.00 for pack of 50 ($2.50 ea.)
	Made of Pure Iron Available in the following heights: 1", 1 1/8", 1 1/4" Cores are a bit over 5/16" thick for hamnmer-fit washer end Tapped M4 Metric, Easily Re-Tapped at 8/32" When Ordering Please Specify: Height	$200.00 for pack of 100 ($2.00 ea.)